A low-gloss, non-reflective cloth tape with a low-residue adhesive that holds cables, marks floors and secures gels on set — then removes cleanly without leaving goo. The same cloth-tape platform also produces a glossy cloth duct variant for HVAC, industrial and repair work.
Songyang gaffer tape pairs a low-gloss cotton cloth carrier with a low-residue adhesive built for temporary holding. It tears cleanly by hand, conforms to cables and corners, and pulls off floors, lighting gear and equipment without leaving adhesive behind — the behavior film, TV, theater and event crews rely on. Production runs in-house at Songyang's Dongguan, China plant — compounding, coating, converting and slitting across 16 production lines — so production buyers source gaffer and cloth duct tape factory-direct instead of through a trading layer. The same line also makes a glossy, aggressive-adhesive cloth duct tape for HVAC, bundling and repair; tell Songyang which behavior your market needs.
Typical gaffer uses include on-set cable management, spike marks and floor marking, securing gels, flags and diffusion on lighting fixtures, stage and scenery holds, and temporary fixes at events and exhibitions.
They share a cloth carrier but are built for different jobs. Know which one your buyers need.
| Attribute | Gaffer Tape | Cloth Duct Tape |
|---|---|---|
| Finish | Low-Gloss, non-reflective — no glare on camera or stage | Glossy PE-coated surface |
| Adhesive | Low-residue, made for clean removal | Aggressive, for a strong long-term bond |
| Removal | Comes off clean — no goo on floors or cables | Can leave residue on surfaces |
| Primary use | Temporary holding: film, TV, theater, events | Permanent: HVAC, bundling, repair |
| Typical buyer | Rental houses, studios, stages, event producers | Hardware, industrial, contractors |
The cotton finish does not glare under cameras or stage lighting — safe on any shoot or performance.
Low-residue adhesive pulls off dance floors, cables and lighting gear without leaving goo behind.
Tears by hand across and along the roll — no dispenser or knife needed on set.
Holds cables, gels and marks through the call, then releases when the job is done.
Molds around cables, corners and uneven fixtures without lifting.
Low-Gloss black and white, custom and fluorescent spike-tape colors, slit widths and private-label packaging.
Songyang manufactures gaffer tape and cloth duct tape at its own plant in Houjie, Dongguan, Guangdong — so overseas buyers deal directly with the production line instead of through a trading layer.
Ordering from Songyang's own plant removes the trading margin between buyer and production, and puts specification questions straight to the people who run the line.
Compounding, coating, converting, slitting, printing and QC all run in-house across 16 production lines, backed by 28 years of tape and film know-how.
Raw films, adhesives, release liners and tooling are clustered around Dongguan, which shortens material lead time and supports sampling in 5–30 days.
Songyang ships to B2B buyers worldwide, supports EXW and FOB terms, and supplies commercial documentation and technical data sheets with the goods.
Songyang is a China-based manufacturer (Dongguan, Guangdong) serving global B2B buyers directly — 9,000+ m² of plant, 16 production lines, 5,000+ specifications and 5,600+ customers served. Made in China, engineered for export.
Model BW330-B2S is built on an 80-mesh TC cotton cloth carrier coated with a thick natural rubber adhesive, with an LDPE-coated backing and release agent. The rubber adhesive layer is what gives gaffer tape its grip on cables, floors and lighting gear — and its clean, low-residue removal when the job is done.
The cloth carrier is what makes it hand-tearable in both directions and conformable around corners and uneven fixtures. Full measured parameters are listed in the specifications below.
Measured typical values from Songyang's technical data sheet, tested to JIS Z 0237 / JIS Z 1524 at 23 ± 2 °C and 50 ± 5% relative humidity. Final specification is confirmed against your application — confirm with our sales team.
| Parameter | Value |
|---|---|
| Model | BW330-B2S (330 heavy-duty cloth tape platform) |
| Structure | 80-mesh TC cotton cloth carrier + natural rubber adhesive; LDPE-coated backing with release agent |
| Finish | Low-Gloss, non-reflective |
| Total thickness | 0.33 mm ± 0.01 mm (330 µm ± 10 µm) |
| 180° peel adhesion | 1.700 kgf/25 mm (≈16.7 N/25 mm), typical |
| Ball tack (JIS) | 28, typical |
| Tensile strength | 14.1 kgf/25 mm (≈138 N/25 mm) |
| Elongation | 10.17% |
| Test standard | JIS Z 0237 / JIS Z 1524 — 23 ± 2 °C, 50 ± 5% RH |
| Removal | Low-residue, clean removal on most surfaces |
| Tear | Hand-tearable, both directions |
| Colors | Low-Gloss black, white; custom and fluorescent (spike tape) |
| Width / Length | Typical stock size 2 IN × 15 YDS (48 mm × 13.716 m); other widths and lengths slit to order |
| Use | Cables, spike marks, gels/flags, stage, events |
Color note: product color may differ slightly from the photographs — the physical sample is the reference.
Cloth duct tape variant: the same line also makes a glossy PE-coated cloth duct tape with an aggressive adhesive for HVAC sealing, carpet seaming, bundling and repair — tell Songyang which construction your market needs.
Securing and bundling cables on film and TV sets, safe on floors and gear.
Marking actor positions and staging on stage and venue floors.
Holding gels, flags, diffusion and color filters on fixtures.
Temporary holds for sets, props and scenery during productions.
Cable covers, booth marking and quick temporary fixes on site.
Sealing, bundling and repair with the glossy cloth duct construction.
Buyer notes on thickness, carrier, adhesive and the substrate the tape has to hold on — plus what to send a factory so you get the construction you need, not the cheapest one that fits the name.
Send specs and quantity — we reply with a quote and technical suggestion within 24 hours.
